电动储能修井机操作规程
1 主题内容和适用范围
1 subject content and scope of application
本规程规定了电动储能修井机操作、巡回检查、维护保养内容和要求。
This regulation stipulates the operation, inspection, maintenance
and maintenance of the electric energy storage workover machine.
本规程适用于公司电动储能修井机操作岗位。
This procedure is applicable to the operation of a company's electric energy storage workover machine.
2 岗位职责
2 job duties
2.1 遵守设备操作规程作业,定期维护和保养设备。
2.1 comply with the operating procedures of the equipment and maintain and maintain the equipment regularly.
2.2 熟悉本岗位存在的风险和应急保护逃生知识,在紧急情况发生时能够按应急计划要求进行迅速撤离或是投入救急工作。
2.2, be familiar with the risks and emergency protection and escape
knowledge in this post. In case of emergency, they can quickly evacuate
according to the requirements of emergency plan or put in emergency
work.
2.3 发现事故隐患或发生事故及时报告。
2.3 find the accident hidden danger or the accident report in time.
2.4 负责设备的启停操作及正常操作工作。
2.4 is responsible for the start and stop operation of the equipment and the normal operation.
2.5 负责设备的巡回检查及故障处理工作。
2.5 responsible for the inspection and troubleshooting of the equipment.
2.6 负责《设备运转记录》的及时填写工作。
2.6 is responsible for the timely completion of the "equipment operation record".
2.7 严格执行《中华人民共和国道路交通安全法》和各项交通安全规章制度。
2.7 the road traffic safety law of the People's Republic of China
and various traffic safety regulations and regulations are strictly
enforced.
3 操作、检查、维护内容及要求
3 operation, inspection, maintenance content and requirements
3.1 操作
3.1 operation
3.1.1 启动前的准备与检查
Preparation and inspection of 3.1.1 before starting
a) 每班工作前,仔细检查各部件是否正常。
A) carefully check whether the components are normal before each class.
b) 清洁整机各部件卫生。
B) clean the whole parts of the machine.
c) 检查并拧紧各部位易松动的螺栓。
C) check and tighten the loosened bolts in each part.
d) 检查底盘车发动机油底壳和变速箱油面是否符合要求,冷却液、燃油是否足量。
D) check whether the chassis of the chassis and the oil surface of
the gearbox meet the requirements, whether the coolant and fuel are
sufficient.
E) check whether the oil surfaces of the gearbox, the angle
transmission box and the hydraulic oil tank are in conformity with the
requirements, and check whether the oil surface in the chain box is
within the range of the observation hole.
f) 检查电控柜(配电柜、变频器柜、变流器柜)、电容器柜和电机接地桩是否可靠接地。
Check the electric control cabinet (f) cabinet, power distribution
cabinet, inverter converter cabinet), capacitor cabinets and electrical
grounding pile is reliable grounding