电动滚筒是工业电机，在使用时难免会有损耗，不过通过调整使用方法和多注意细节，可以延长机器的使用寿命，如下是嘉轩（JASUNG）整理出来有关于电动滚筒使用的注意事项：
Electric drum is an industrial motor, which will inevitably lose in use. However, by adjusting the use method and paying more attention to details, the service life of the machine can be prolonged. The following points for attention about the use of electric drum are sorted out by JASUNG:
简体包胶的电动滚筒，电机功率应提高-档。
The motor power of the electric drum encapsulated with glue should be increased to gear.
电动滚筒工作的环境温度为-10度至40度，物料温度小于600度，海拔高 度不超过1000米。如果工作环境超出上述范围，请与生产厂联系解决。
The working environment temperature of the electric drum is - 10 degrees to 40 degrees, the material temperature is less than 600 degrees, and the altitude is not more than 1000 meters. If the working environment is beyond the scope mentioned above, please contact the manufacturer for solution.
电动滚筒每天连续工作超过8小时，电机功率需提高一档。
The electric drum works continuously for more than 8 hours every day, and the power of the motor needs to be increased by one gear.
启动频繁的电动滚筒，电机功率应提高—档。
The power of motor should be increased when the electric drum is frequently started.
用户应当严格按照使用说明书中规定的润滑油种类和换油时间更换润滑油。
Users should replace lubricants in strict accordance with the types of lubricants and oil changing time specified in the instructions.
电动滚筒应当水平安装，最大倾角不超过5度。
Electric drum shall be installed horizontally with maximum inclination not exceeding 5 degrees.
限制一个方向旋转时，应选用带有机械逆止器的电动滚筒。
When restricting rotation in one direction, the electric drum with mechanical backstop should be selected.
电动滚筒如需在负荷下启动，请与生产厂联系解决。
If the electric drum needs to start under load, please contact the manufacturer to solve the problem.
要求断电立即停车时，应选用带电磁制动器的电动滚筒。
Electric drum with electromagnetic brake should be selected when power failure is required to stop immediately.