Attention to the use of electric roller:

   1.使用前应检查滚筒内部油量，油量以滚筒直径的2/5为宜；检查电机接线是否正确（注：滚筒出厂时为无油状态 ）。

The oil quantity inside the cylinder should be checked before use 1.. The oil quantity is 2/5 of the diameter of the drum; check the electrical wiring is correct (Note: the cylinder is out of oil when the drum is out of the factory).

   2.滚筒须空载启动。

The 2. cylinder must be launched in no load.

   3.滚筒第一次工作300小时后更换润滑油（润滑油牌号：油冷式加N46号，油浸式加N32号汽轮机油，三水电动滚筒，也可使用N150中负荷工业齿轮油，大型电动滚筒，相当于SAE90汽车齿轮油，这种油对齿轮的润滑作用更佳），以后每隔5000小时换油一次并进行保养维修。

After the first work of the 3. cylinder, 300 hours after the replacement of lubricating oil (lubricating oil brand: oil cooling type plus N46 number, oil immersion plus N32 turbine oil, three water electric roller, also can use N150 load industrial gear oil, large electric roller, equivalent to SAE90 automobile gear oil, this oil is better lubrication of gear), later, the oil is better), after the oil is better lubricated gear), Oil is changed every 5000 hours for maintenance.

   4.定期检查油位，根据密封情况调整油封弹簧或更换油封。

4. check the oil level regularly, adjust the oil seal spring or replace the oil seal according to the sealing condition.

   5.电动滚筒电器线路中应安装相配套的过载，缺相运行等保护装置，电动滚筒安装尺寸，避免因电路故障烧坏电机，造成损失。

In the 5. electric roller electric circuit, it is necessary to install the auxiliary overload, lack of phase operation and other protective devices. The size of the electric roller should be installed to avoid the damage to the motor because of the circuit failure.

   6.电动滚筒工作的环境温度位-10至40摄氏度，物料温度小于60摄氏度，海拔高度不要超过1000米，如果工作环境超出上述范围，请与生产厂联系解决

The ambient temperature of the 6. electric roller is -10 to 40 degrees Celsius, the material temperature is less than 60 degrees Celsius, and the altitude is not more than 1000 meters. If the working environment is beyond the above range, contact the production plant.

在电子商务高速发展的今天，电动滚筒厂家，网购已经成为了人们主流的购物方式。电子商务网站之间的竞争也日益激烈，用户对网站的体验满意度也成为了衡量电子商务网站重要的标准之一。根据客户对电子商务网站的满意评价，相对于电子商务网站的其他各个环节，物流环节的满意度评价是低的。在物流环节中，客户对配送分拣中心作业的不满意度高达27%。因此，提高配送中心的分拣作业效率，可以有效的提高客户网络购物的满意程度，降低客户流失率，增强整体的市场竞争力。其中配送分拣设备中所选取的驱动单元也尤为重要。电动滚筒应用于配送分拣设备中作为驱动单元使用可以有效的提高整体配送分拣效率。

With the rapid development of e-commerce, online shopping has become the mainstream shopping mode for electric roller manufacturers. The competition between e-commerce websites has become increasingly fierce. User satisfaction with websites has also become one of the most important criteria for measuring e-commerce websites. According to the customer satisfaction evaluation of e-commerce website, compared with other links of e-commerce website, the satisfaction evaluation of logistics links is low. In logistics links, customers' dissatisfaction with distribution and sorting centers is as high as 27%. Therefore, improving the efficiency of the sorting operation of the distribution center can effectively improve the satisfaction degree of the customer's network shopping, reduce the rate of customer loss and enhance the overall market competitiveness. Among them, the driving unit selected in the distribution sorting equipment is also particularly important. The application of electric roller in distribution and sorting equipment as a driving unit can effectively improve the overall distribution and sorting efficiency.