This is to introduce suitable drift and slope for specification of JD mine dispatching winch all kinds of inclined 0-25 DEG rope device. The specification of the rope dispatching winch device can guarantee the winch rope steam, compact, good sense of complete mine winch transport safety, eliminate the inclined tunnel transportation safety risks, to prevent arbitrary pressure rope, rope, rope bite phenomenon, improve the safety of coal production, effectively avoid the occurrence of major accidents.

让我们先来了解一下绞车排绳器想要达到的技术目标：

Let's get to know the technical goals that the winch ropes are trying to achieve.

1)不附加动力源，全机械式：

1) no additional power source, all mechanical:

2)自动强制规范缠绳：

2) automatic compulsive standard rope:

3)能适用于直向、侧向等不同安装工况现场：

3) can be applied to the field of straight, lateral and other different installation conditions.

4)自成一体，独立安装，无需对绞车大量改造:

4) self - integrated, independent installation, no need to change a lot of winches:

5)结构简单，尺寸小：

5) the structure is simple and the size is small.

6)缠绳规范可靠、有效杜绝乱绳现象：

6) the winding rope is reliable and effective to eliminate the disorder of the rope.

7)安装、维修方便等。

7) easy to install and repair.

1

One

造成内齿轮绞车排绳乱的主要原因：

The main causes of the disorderly row of the inner gear winch are as follows:

一、造成内齿轮绞车排绳乱的主要原因：

First, the main cause of the disorderly row of the inner gear winch is:

1、绞车位置与提升中心线偏差太大，钢丝绳入绳角太大，不能正常排绳。

1. The deviation of the position of the winch and the center line of the hoist is too large. The angle of the wire rope is too big and the rope can not be discharged normally.

2、对拉绞车滚筒缠放绳时无张力，造成排绳不紧造成乱绳或钢丝绳脱圈。

2. There is no tension in the winding of the drawworks of the winch roller, which causes the rope or wire rope to take off the ring.

3、母子绳排绳不紧凑，钢丝绳使用时间一长，钢丝绳压扁、挤出，造成压绳、挤绳现象。

3, the rope of the mother and son is not compact, the use time of the wire rope is long, the wire rope is compressed and extruded, which causes the phenomenon of pressing rope and extruding rope.

2

Two

内齿轮绞车排绳乱的主要危害：

The main damage of the inner gear winch in the disorderly line is:

二、内齿轮绞车排

Two, inner gear winch row

1、加快钢丝绳的磨损，钢丝绳在滚筒上杂乱无章缠绕时，受力绳经常要从乱排绳子中挤出来又压进去，造成严重磨擦和磨损，致使钢丝绳直径磨细和断丝增多，缩短使用寿命。

1, to speed up the wear of wire rope, when the wire rope is winding up on the drum, the stressed rope often needs to be squeezed out from the row of rope and pressed into it, causing serious friction and wear, resulting in the increase of wire diameter and broken wire and shortening the service life.

2、造成钢丝绳滑出滚筒外，绞车上钢丝绳排列不整齐时堆挤严重，堆挤高度超过滚筒边高时钢丝绳将会滑出滚筒外，轻则断丝，重则断绳。

2, cause the wire rope to slide out of the drum, when the wire rope on the winch is not arranged regularly, it will pile up badly. When the height of the pile is higher than the height of the drum, the wire rope will slide out of the drum, and then it will break the wire and break the rope.

3、使用在采区变坡轨道中的对拉绞车，用于巷道地形原因绳速时快时慢，钢丝绳时松时紧，会出现钢丝绳脱圈对操作人员造成很大威胁。

3, the use of variable slope in orbit in the mining area to pull the winch for roadway terrain rope speed speed, wire rope when the tight loose, there will be rope off the circle poses a great threat to the operator.

3

Three

人工排绳的缺点

Shortcomings of artificial rope arrangement

1、人工排绳工作量大，需将钢丝绳从滚筒上全部抽出后重新上绳，需多人配合，排绳过程中隐患较大,人身安全得不到保障。

1, the workload of manual rope laying is large. It is necessary to pull the wire rope out of the drum and rejoin the rope. It needs more people to cooperate. There is a great potential in the process of rope arranging, and the personal safety is not guaranteed.

2、人工排绳不够紧凑，特别是母子绳不容易排好，长时间使用就会出现挤绳现象，缠绕的圈数越多挤绳情况越严重。

2, artificial rope is not compact enough, especially the mother and son rope is not easy to row. Long time use will appear rope extrusion phenomenon, the more the number of winding, the more serious the rope is.

4

Four

规范排绳装置构造及工作原理

Construction and working principle of standard rope arranging device

四、规范

Four, specification

各部分结构

Each part structure

1、内齿轮绞车由电动机、滚筒筒、行星齿轮传动装置、离合闸、制动闸和底盘构成。

1. The inner gear winch is composed of a motor, a drum cylinder, a planetary gear drive, a clutch, a brake and a chassis.

2、规范排绳装置由大链轮、传动链，小链轮、自交双螺旋轴、三孔架及月牙制子、排绳压辊、支架组成。

2, standard rope device is composed of a big chain wheel, chain drive, small sprocket, double helix axis, three self frame and system, crescent rope roller and a support bracket.

在绞车工作过程中，多数矿山企业都对绞车排绳不整齐容易出问题有所反映，有时会造成压绳、乱绳、钢丝绳相互挤压严重的情况，更严重时会引发矿山工作事故，为企业带来财产损失，为了减少此类问题的出现和出现的不必要的财产损失，矿用绞车排绳装置应运而生，排绳装置的出现很好的解决了此类问题的产生，为矿山企业绞车工作提供了很好的防护措施，对于大多的矿山企业来说还是值得拥有的。

The winch in the work process, the majority of mine enterprises are on the winch rope uneven easy problems reflected, sometimes causing pressure rope, wire rope, rope disorder squeeze each other seriously, more serious when cause mine accidents, caused property losses for the enterprise, in order to reduce such problems and the emergence of the the unnecessary loss of property, mine winch rope device emerged, rope arranging device has well solved the problems, provide good protection measures for the winch work in mining enterprises, for the mine enterprises are to say is well worth having.